YAIP 1.5.0 - test build for LG TVs
=================================================

Thanks for testing! This puts YAIP on your LG TV (webOS) before it is in the LG store.
It takes about 10 minutes the first time. You need the TV and a Mac or Windows computer on the
same Wi-Fi/network.


ONE-TIME SETUP ON THE TV
------------------------
1. On your phone or computer, create a free LG developer account:
   https://webostv.developer.lge.com  ->  Sign In  ->  Create account.

2. On the TV, open the LG Content Store (Apps), search for "Developer Mode" and install it.

3. Open Developer Mode on the TV and sign in with that LG developer account.

4. Switch "Dev Mode Status" ON. The TV restarts.

5. Open Developer Mode again and switch "Key Server" ON.
   Leave this screen open: it shows the TV's IP address and a Passphrase you will need below.


INSTALL
-------
Mac:
  1. Double-click the zip to unzip it, then double-click "Install on Mac.command".
  2. If macOS says it cannot be opened: open System Settings > Privacy & Security, scroll down,
     click "Open Anyway" next to "Install on Mac.command", then confirm.

Windows:
  1. Right-click the zip > "Extract All...", open the extracted folder.
  2. Double-click "Install on Windows.cmd".
     If a blue "Windows protected your PC" box appears: click "More info" > "Run anyway".

Then type the TV's IP address and the Passphrase from the Developer Mode screen.
When it says "Done!", YAIP opens on the TV and stays in your app list.


GOOD TO KNOW
------------
- The Developer Mode session lasts about 40 days. When it runs out, test apps stop working.
  Open the Developer Mode app every few weeks and press EXTEND.
- New test build? Run the new kit the same way; it replaces the old version.
- To remove the app: highlight it in the TV's app list, hold OK (or use the pencil/edit option) and
  choose Delete. You can also switch Dev Mode Status OFF, which removes all test apps.


SOMETHING WENT WRONG?
---------------------
- "Could not reach the TV": check the IP address on the Developer Mode screen, that Key Server is
  ON, and that the computer is on the same network as the TV (not a guest network).
- "Passphrase was not accepted": type it exactly as shown; it is case-sensitive.
- Anything else: restart the TV, open Developer Mode, check both switches are ON and run the
  installer again. Still stuck? Send a photo of the window to the person who sent you this kit.
